Years Of
Experience
Mr.Dumbwaiter Lift in Indonesia
For commercial buildings and retrofits in Indonesia, Mr. Dumbwaiter supplies modular, low-pit dumbwaiters engineered to fit existing shafts or freestanding structural steel towers. Adhering to Permenaker No. 6/2017 for Passenger and Service Lifts (Elevator & Hoist) and certified by Ministry of Manpower Republic of Indonesia (Kemenaker RI), our systems provide dependable 50kg-300kg multi-floor transport without costly civil reconstruction.
Mr. Dumbwaiter provides architectural vertical transport and retrofit dumbwaiter solutions across Indonesia, engineered for properties where traditional elevator shafts are structurally impractical. Utilizing self-supporting structural steel towers, our installations require zero dedicated brick masonry and can be accommodated with a shallow 200mm pit or surface ramp.
Every installation in Indonesia is designed to minimize floor penetration footprint, preserve historic architectural integrity, and meet all mechanical hoist standards supervised by Ministry of Manpower Republic of Indonesia (Kemenaker RI).
Retrofitting vertical goods transport into existing buildings in Indonesia requires careful structural assessment of ceiling heights, floor slab penetrations, and electrical supply. Our engineering team prepares bespoke CAD shaft drawings tailored to the specific dimensions of your property, allowing the installation of self-supporting steel framework towers that transfer the entire system load directly to the base floor.
With minimum overhead headroom requirements of just 2400mm at the top landing and a pit depth of only 200mm to 300mm, our systems integrate smoothly into historic commercial buildings, shophouses, and multi-level retail units across Indonesia. Optional pitless bottom ramps allow ground-level roll-in loading where floor excavation is impossible.
Electrical controls are housed in an IP54-rated lockable control cabinet featuring solid-state programmable logic microprocessors, phase reversal monitoring, and thermal motor overload cutoffs compatible with Single Phase 220V 50Hz or 3-Phase 380V 50Hz. All installations are fully compliant with Permenaker No. 6/2017 for Passenger and Service Lifts (Elevator & Hoist) and ready for statutory local authority inspections.
Commercial Services & Channels in Indonesia
Direct factory manufacturing, certified local supply, replacement, and 24/7 technical repair coverage for all commercial kitchens and facilities in Indonesia .
Manufacturers
Custom fabrication of SUS 304 food-grade dumbwaiters, car enclosures, and machine frames built specifically for Indonesia floor plans.
View ManufacturersSuppliers
Direct supply of factory-certified dumbwaiter kits, bi-parting landing doors, traction gearboxes, and safety governor units in Indonesia .
View SuppliersDealer
Authorized trade distribution, architectural shaft consultation, and commercial contractor support across Indonesia .
View DealerExporters
Export-grade packaging, international freight dispatch, and customs-ready logistics for projects throughout Indonesia and beyond.
View ExportersRepair service
Rapid on-site emergency repairs, door lock troubleshooting, electrical rewiring, and cable replacements across Indonesia .
View Repair serviceReplace service
Safe decommissioning and replacement of aged, non-compliant, or obsolete dumbwaiters with modern quiet traction systems.
View Replace serviceInstallation service
Professional mechanical and electrical shaft installation by certified elevator technicians adhering to local codes in Indonesia .
View Installation serviceMaintenance Services
Comprehensive preventive servicing contracts, monthly inspections, safety audits, and certification renewals in Indonesia .
View Maintenance ServicesDumbwaiter & Food Lift Products in Indonesia
Explore our full line of commercial vertical transport systems available for immediate project sizing, supply, and installation across Indonesia .
Technical Sizing Matrix & Hoistway Planning for Indonesia
Standard machine dimensions, payloads, and architectural shaft requirements for installations in Indonesia .
| Model Series | Rated Payload | Car Dimensions (W x D x H) | Minimum Hoistway Space | Travel Speed | Recommended Use in Indonesia |
|---|---|---|---|---|---|
| Compact Service (FL-50) | 50 kg | 500(W) x 500(D) x 600(H) mm |
850(W) x 800(D) mm |
0.35 m/s | Cafes, clinic dispensaries, small bars in Indonesia |
| Standard Commercial (DW-100) | 100 kg | 600(W) x 600(D) x 800(H) mm |
950(W) x 900(D) mm |
0.40 m/s | Restaurants, bistros, hotels, catering centers in Indonesia |
| Heavy Duty Freight (DW-250) | 250 kg | 800(W) x 800(D) x 1000(H) mm |
1200(W) x 1150(D) mm |
0.30 m/s | Warehouses, industrial storage, laundry facilities in Indonesia |
| Industrial Goods Lifter (WH-500) | 300-500 kg | 1000(W) x 1000(D) x 1200(H) mm |
1450(W) x 1400(D) mm |
0.25 m/s | Mezzanine storage, factory carton movement in Indonesia |
Pit Requirement
Shallow pit of 200 mm to 300 mm. Alternatively, a pitless ramp design can be installed directly onto finished tiled or epoxy floors in Indonesia.
Headroom Height
Minimum top-floor overhead headroom of 2400 mm to accommodate traction sheaves, limit switches, and motor mounting.
Shaft Structure
Can be fitted inside a reinforced concrete/brick masonry hoistway, or supplied with our freestanding galvanized steel self-supporting structural tower requiring no dedicated brickwork.
Power Configuration
Single Phase 220V 50Hz or 3-Phase 380V 50Hz with built-in thermal overload motor protection, phase reversal relay, and emergency battery lowering circuit.
Door Configuration
Vertical bi-parting counter-weighted doors or single swing fire-barrier doors fitted with electromechanical solenoid locks to ensure zero operation while any access point is open.
Technical CAD Drawings & Building Schematics for Indonesia
Every Mr. Dumbwaiter system is fabricated using genuine SUS 304 food-grade stainless steel (1.2mm to 1.5mm car panel thickness) and equipped with certified bi-parting electromechanical safety door interlocks complying with Permenaker No. 6/2017 for Passenger and Service Lifts (Elevator & Hoist). Download certified dimensional drawings for architectural planning:
Our Services in Indonesia
Complete lifecycle engineering for dumbwaiters and vertical freight hoists across commercial and industrial facilities.
New Dumbwaiter Supply
Custom dumbwaiter solutions designed for your building, application and capacity requirements, with professional installation.
Modernization & Upgrades
Modernise older or unreliable dumbwaiters by upgrading controllers, landing door interlocks, motors, and safety gears.
Preventive Maintenance
Scheduled servicing, safety checks, and responsive troubleshooting to ensure smooth, uninterrupted daily service.
Factory & Goods Hoists
Rugged, cost-effective freight hoists designed for factory storage, commercial cartons, and mezzanine access.
Rapid Fault Repair
Prompt diagnostic support for door interlocks, motor drives, cable alignment, and emergency control issues.
Parts & Technical Drawings
Supply of certified replacement parts, guide rails, door sensors, and architectural shaft drafting services.
Engineering Site Survey
On-site assessment to verify hoistway clearances, slab openings, electrical feed, and optimum car capacity.
Flexible Payment Plans
Practical payment schedules designed for hospitality venues and commercial facility managers.
+ Completed Projects
+ Commercial Clients
+ Engineering Specialists
+ Systems Built
Preferred by Premier Hospitality, Commercial & Healthcare Brands
Engineered and deployed for commercial kitchens, multi-tier restaurants, luxury hotels, pharmaceutical labs, and industrial facilities in Indonesia and globally.
What do you want to lift in Indonesia ?
From compact food trays to heavy warehouse inventory, our dumbwaiters and vertical hoists are tailored to the exact ergonomics of your commercial workflow.
Floor Loading (Roll-in Carts)
Flush floor level entry for heavy wheeled bins, beverage crates, and laundry trollies.
Table / Counter Loading
Waist-height access (800mm) designed for kitchen meal trays and dish transfers without bending.
Multi-Side Access Options
Adjacent 90° or through-loading 180° entry/exit configurations to match complex floor plans.
Frequently Asked Questions in Indonesia
Answers regarding installation timelines, building safety standards, power requirements, and site surveys in Indonesia .
Nearby Regional Service Areas:
Request Quotation & Shaft Layout for Indonesia
Share your building floor levels, expected payload, and travel height. Our engineering desk provides custom shaft layout drawings and pricing within 24 hours.
- Free architectural shaft drawing review
- Full compliance with local elevator & hoist standards
- Fast dispatch and turnkey installation support
